Audi A3 Quiz
Body

Removing and Installing B-Pillar Trim

In this manual: Body
Owner's Manual — 42Routine Care and Maintenance — 32Engine — 22Engine Cooling System — 9Ventilation, Heating and Air Conditioning Systems — 11Fuel System — 9Fuel Injection System — 4Diesel engine injection system — 5Exhaust System — 9Electronic Ignition and Fuel Injection Control System — 6Charging and Starting Systems — 12Manual transmission — 12Clutch and Drive Shafts — 6Brake System — 13Front Suspension — 5Rear Suspension — 6Steering — 7Body — 70Body Electrical Equipment — 37Wiring Diagrams — 35
~1min read

GENERAL INFORMATION

Накладка стойки В кузова СНЯТИЕ

B-Pillar Body Trim REMOVAL

PROCEDURE

1. Remove the door seal –3– in the area of the trim –2–.

2. Drill out the rivet heads –1–.

3. Remove the visor with brackets from the sliding window –4–.

4. Remove the visor. INSTALLATION

PROCEDURE

1. Install the visor with brackets onto the sliding window as shown in the illustration.

2. Install new rivets using, for example, HAZET tools.

1963.

3. Reinstall the door seal in the areas where it was removed.

Test yourself

A quick Audi A3 quiz: every answer comes with an explanation and a link to the manual page.