Audi A3 Quiz
Body

Removal and Installation of Glove Box

In this manual: Body
Owner's Manual — 42Routine Care and Maintenance — 32Engine — 22Engine Cooling System — 9Ventilation, Heating and Air Conditioning Systems — 11Fuel System — 9Fuel Injection System — 4Diesel engine injection system — 5Exhaust System — 9Electronic Ignition and Fuel Injection Control System — 6Charging and Starting Systems — 12Manual transmission — 12Clutch and Drive Shafts — 6Brake System — 13Front Suspension — 5Rear Suspension — 6Steering — 7Body — 70Body Electrical Equipment — 37Wiring Diagrams — 35
~1min read

REMOVAL

PROCEDURE

1. Disconnect and remove the side cover of the instrument panel.

2. Disconnect the connector -4- of the glove box light.

3. Remove the 4 mounting screws -1-.

4. Remove the screw -2-.

5. Open the glove box lid and remove the 3 screws -3-.

6. Open the side cover and unscrew 3 screws –3–.

7. Remove the glove box. INSTALLATION

PROCEDURE

1. Install the glove box in place.

2. Install and secure the side panel –5–.

3. Screw in the screws –3– and tighten them to 4 N·m, then close the cover.

4. Tighten the screws -2- to 4 N·m.

5. Tighten the screws –1– to 4 N·m.

6. Connect the connector –4– of the glove box light.

7. Install the instrument panel side cover in place.

Test yourself

A quick Audi A3 quiz: every answer comes with an explanation and a link to the manual page.