Body
Removal and Installation of Rear Side Trim
In this manual: Body
~1min read
3-door models REMOVAL
PROCEDURE
1. Remove the rear seat and backrest, refer to subsection Removal and Installation of Rear Seat and Backrest.

2. Disconnect the rear side trim –1–, starting from the top.
3. Pull the side trim out of the door sill plate from the inside.
4. Disconnect the connector.
5. Remove the side trim. INSTALLATION
PROCEDURE
1. Install the side trim –1– in place and insert it into the door sill plate from the inside.
2. Install the side trim in reverse order of removal.
3. Install the rear seat and backrest, refer to subsection Removal and Installation of Rear Seat and Backrest.
Test yourself
A quick Audi A3 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?