Audi A3 Quiz
Body

Central Locking Pump Removal and Installation

In this manual: Body
Owner's Manual — 42Routine Care and Maintenance — 32Engine — 22Engine Cooling System — 9Ventilation, Heating and Air Conditioning Systems — 11Fuel System — 9Fuel Injection System — 4Diesel engine injection system — 5Exhaust System — 9Electronic Ignition and Fuel Injection Control System — 6Charging and Starting Systems — 12Manual transmission — 12Clutch and Drive Shafts — 6Brake System — 13Front Suspension — 5Rear Suspension — 6Steering — 7Body — 70Body Electrical Equipment — 37Wiring Diagrams — 35
~1min read

REMOVAL

PROCEDURE

1. Remove the shelf from the side trim panel.

2. Open the clip –2–.

3. Open the sound insulation element –1–.

4. Disconnect the electrical and pneumatic connections.

5. Remove the central locking pump. INSTALLATION

PROCEDURE

1. Insert the central locking pump into the sound insulation element.

CAUTION

When reconnecting previously disconnected electrical and pneumatic connections, make sure the 6-pin connector is connected last of the three connections.

2. Connect the electrical and pneumatic connections. The pneumatic connections must lock into place.

3. Close the sound insulation element.

4. Secure the cable connector to the sound insulation element.

5. Insert the shelf into the side trim panel on the left.

Test yourself

A quick Audi A3 quiz: every answer comes with an explanation and a link to the manual page.