Seat Belt Reminder Light

Seat Belt Reminder Light

The indicator comes on when the ignition switch is turned to the ON (II) position.

It reminds you and your passengers to fasten your seat belts. If the seat belt is not fastened, the indicator light comes on together with an audible warning signal.

When the ignition key is turned to the ON (II) position before the seat belt is fastened, a warning buzzer sounds and the warning indicator flashes. If you do not fasten the seat belts before the buzzer stops, the indicator will stop flashing but will remain illuminated.

If the front passenger does not fasten the seat belt, the indicator comes on approximately 6 seconds after the ignition switch is turned to the ON (II) position.

If the driver's or front passenger's seat belt is not fastened while the vehicle is moving, the indicator flashing and the buzzer sounding will repeat periodically. For more information, refer to page 22.

If the driver's seat belt is not fastened, the multi-information display shows the icon "
” or the message "FASTEN YOUR SEAT BELT"; if the front passenger's seat belt is not fastened, the multi-information display shows the “
” or the message "FASTEN PASSENGER'S SEAT BELT".

The system detects whether the buckle of any rear seat belt is fastened.

You can check which seat belts are in use on the multi-information display (refer to page 98).