Engine speed indicator

You can turn the tachometer indicator on or off. When "REV INDICATOR" appears on the display, press the SEL/RESET (Select/Reset) button.
The display will go to the setting procedure.

You can select between ON and OFF. Each press of the INFO button turns the selected mode on or off alternately. Confirm your selection by pressing the SEL/RESET button.

After the operation is successfully completed, the confirmation message SETUP ON or SETUP OFF will be displayed for a few seconds, and then the display will return to the CHG SETTING (Change Setting) screen. Press the SEL/RESET button, then press the INFO button repeatedly to change other settings.
If the system is unable to set the selected setting, the display will show the message INCOMPLETE (Setup Not Completed) for a few seconds.
The display will return to the start of the setup procedure. You will need to repeat the setup.
To exit the setting mode without changing the previously set value, select EXIT by pressing the INFO button, then press the SEL/RESET (Select/Reset) button. The display will return to normal operation.
If the vehicle is equipped with i-SHIFT transmission operating in automatic mode, the tachometer indicator will turn off even if it was turned on during setup.
Test yourself
A quick Honda Civic quiz: every answer comes with an explanation and a link to the manual page.