Warning Messages

Warning text messages may be shown on the multi-information display together with the icons. When WARNING MESSAGE appears on the display, press the SEL/RESET (Select/Reset) button.

The display will go to the setting procedure.

You can select between ON and OFF. Each press of the INFO button turns the selected mode on or off alternately. Confirm your selection by pressing the SEL/RESET button.

After the operation is completed successfully, the display will show the confirmation SETUP ON for a few seconds, and then return to the CHG SETTING (Change Setting) screen. Press the SEL/RESET button, and then press the INFO button repeatedly to access the mode for changing other settings. If the system is unable to set the selected setting, the display will show the message INCOMPLETE (Setup Not Completed) for a few seconds. The display will return to the beginning of the setting procedure.

You will need to repeat the setting procedure.

To exit the setting mode without changing the previously set value, select EXIT by pressing the INFO button, then press the SEL/RESET button (see page 118). The display will return to the ''WARNING MESSAGE'' mode. To return to the normal display operating mode, select the icon, then press the SEL/RESET button.