Display Unit Setting

For vehicles with right-hand steering wheel only

You can set the units in which the onboard computer displays values. Three unit options are available: AUTO (Automatic Mode), KM (kilometers), and MILES (miles).

AUTO (Automatic Mode): The units displayed by the onboard computer match the units set for the speedometer. The display can be switched between "km" and "miles".

KM (kilometers): The units displayed by the multi-function display onboard computer do not match the units set for the speedometer.

In all cases, the unit "km" is used.

MILES (miles): The units displayed by the multi-function display onboard computer do not match the units set for the speedometer.

In all cases, the unit "miles" is used.

As soon as the text DISPLAY UNIT appears on the display, press the SEL/RESET button. The display will proceed to the setting procedure.

You can select between the options ''AUTO,'' ''KM,'' or ''MILES''. Each time the INFO button is pressed, the selected mode will alternate. Confirm your selection by pressing the SEL/RESET button.

After the operation is successfully completed, one of the confirmation messages SETUP AUTO, SETUP KM or SETUP MILES will be displayed for a few seconds, and then the display will return to the CHG SETTING (Change Setting) screen. Press the SEL/RESET button, then press the INFO button repeatedly to change other settings.

If the system is unable to set the selected setting, the display will show the message INCOMPLETE (Setup Not Completed) for a few seconds. The display will return to the beginning of the setting procedure.

You will be able to repeat the setting procedure.

To exit the setting mode without changing the previously set value, select EXIT by pressing the INFO button, then press the SEL/RESET (Select/Reset) button. The display will return to normal operation.