Brake Control / Dynamic Control Systems

Acceleration Sensor Internal Circuit (C1419, C1435)

~1min read

DESCRIPTION

These DTCs are stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the yaw and acceleration sensor (airbag sensor assembly).

DTC No.

Detection Item

DTC Detection Condition

Suspected Area

C1419

Acceleration sensor internal circuit

With the +BS terminal voltage between 9.6 and 16.5 V, an acceleration sensor malfunction signal is received from the acceleration sensor.

Acceleration Sensor (Airbag Sensor Assembly)

C1435

Yaw rate sensor internal circuit

With the +BS terminal voltage between 9.6 and 16.5 V, a yaw sensor malfunction signal is received from the yaw sensor.

Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly)

PROCEDURE

  1. REPLACE AIRBAG SENSOR ASSEMBLY

(a) Replace the yaw and acceleration sensor (airbag sensor assembly).

Click here

HINT:

If troubleshooting was performed according to the symptom chart, refer to the chart and go to the next step before replacing parts.

Click here

NEXT

END