Brake Control / Dynamic Control Systems
Steering Angle Sensor Internal Circuit (C1433)
In this manual: Brake Control / Dynamic Control Systems
~1min read
DESCRIPTION
This DTC is stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the steering angle sensor.
DTC No. | Detection Item | DTC Detection Condition | Suspected Area |
|---|---|---|---|
C1433 |
Steering angle sensor internal circuit |
With +BS terminal voltage between 9.6 and 16.5 V, a steering angle sensor malfunction signal is received from the steering angle sensor. |
Steering angle sensor |
PROCEDURE
REPLACE STEERING ANGLE SENSOR
(a) Replace the steering angle sensor.
Click here![]()
HINT:
If troubleshooting was performed according to the symptom chart, refer to the chart and go to the next step before replacing parts.
Click here![]()
| NEXT | END |
Was this page helpful?