Brake Control / Dynamic Control Systems

NE Signal (C1224)

~1min read

DESCRIPTION

The skid control ECU (brake actuator assembly) receives engine speed signals from the ECM via the CAN communication system.

DTC No.

Detection Item

DTC Detection Condition

Suspected Area

C1224

NE signal

With 6 km/h vehicle speed at minimum, the +BS terminal voltage is between 9.6 and 16.5 V and the engine speed signal is greater than or equal to 12,800 rpm for 2.5 seconds.

  • CAN communication system
  • ECM

PROCEDURE

  1. INSPECT CAN COMMUNICATION SYSTEM

(a) Check whether CAN communication system DTCs are output.

Click here

Result:

Result

Proceed to

No DTCs are output.

A

DTCs are output.

B

B

INSPECT CAN COMMUNICATION SYSTEM

A
  1. CHECK SFI SYSTEM

(a) Check whether DTCs related to the SFI system are output.

without fuel vapor pump module: Click here

with fuel vapor pump module: Click here

Result:

Result

Proceed to

No DTCs are output.

A

DTCs are output (without fuel vapor pump module)

B

DTCs are output (with fuel vapor pump module)

C

A

REPLACE ECM

B

CHECK SFI SYSTEM

C

CHECK SFI SYSTEM