Brake Control / Dynamic Control Systems

Brake warning light does not come on

~2min read

DESCRIPTION

The skid control ECU (brake actuator assembly) is connected to the combination meter via CAN communication.

PRECAUTION / NOTICE / HINT

NOTICE:

  • When replacing the Skid Control ECU (Brake Actuator Assembly), perform system variant coding.

    Click here

  • Check the fuses for the circuits related to this system before performing the following procedure.

PROCEDURE

  1. INSPECT CAN COMMUNICATION SYSTEM

(a) Check whether CAN communication system DTCs are output.

Click here

Result:

Result

Proceed to

No DTCs are output.

A

DTCs are output.

B

B

INSPECT CAN COMMUNICATION SYSTEM

A
  1. PERFORM ACTIVE TEST USING INTELLIGENT TESTER (BRAKE WARNING LIGHT)

(a) Select the Active Test mode on the Techstream.

Click here

Chassis > ABS/VSC/TRAC/EPB > Active Test

Tester display

Item

Control Range

Diagnostic Note

Brake Warning Light

Brake Warning Light (Red)

Light on / off

Inspect the instrument cluster assembly

Chassis > ABS/VSC/TRAC/EPB > Active Test

Brake Warning Light

(b) Select the Data List on the Techstream.

Click here

Chassis > ABS/VSC/TRAC/EPB > Data List

Tester display

Item

Range

Normal Condition

Diagnostic Note

Brake Warning Light

Brake Warning Light (Red)

ON or OFF

ON: Indicator on

OFF: Indicator off

-

Chassis > ABS/VSC/TRAC/EPB > Data List

Brake Warning Light

(c) Check the operation of the brake system warning light (red warning light) when it is activated using the Techstream.

Result:

Result

Proceed to

The brake system warning light (red warning light) in the Data List does not change with the Active Test.

A

The brake system warning light (red warning light) in the Data List is turned on/off with the Active Test.

B

A

REPLACE BRAKE ACTUATOR ASSEMBLY

B
  1. CHECK COMBINATION METER ASSEMBLY

(a) Perform the Active Test of the combination meter assembly using the Techstream.

Click here

Body Electrical > Combination Meter > Active Test

Indicat. Lamp Brake

(b) Check the combination meter assembly.

OK:

The brake system warning light (red warning light) turns on or off according to the Techstream.

OK

REPLACE BRAKE ACTUATOR ASSEMBLY

NG

CHECK METER / GAUGE SYSTEM