General Information
This page covers the safety information for using the tire sealant kit on the Ford Mustang VI Gen. It is emphasized that only minor damage to the tread may be repaired and that driving speed and distance must remain limited. Correct use of the kit helps maintain mobility in the event of a flat tire without compromising safety.
WARNING
Failure to follow these guidelines increases the risk of loss of vehicle control, injury, and even death.
Note: Do not use the kit on a severely damaged tire. Use the kit to seal only holes in the tire tread.
Do not attempt to repair holes larger than ¼ in. (6 mm) or damage to the tire sidewalls. The tire may not be fully sealed.
A drop in tire pressure can impair tire performance. For this reason:
Note: Do not drive the vehicle faster than 80 km/h.
Note: Do not drive the vehicle farther than 200 km. Drive only to the nearest Ford dealer or tire service center to have your tire inspected.
- Drive carefully and avoid sudden steering movements.
- Regularly monitor the tire inflation pressure of the affected tire. If the tire continues to lose pressure, have the vehicle towed.
- Read the information in the section with tips on using the kit to ensure safe use of the kit and your vehicle.
The instructions for using the tire sealant kit in the Ford Mustang (VI Gen, 2014–2023) emphasize safety and correct use. The Ford Mustang 2014–2023 provides clear instructions for restoring tire pressure and avoiding damage. Observing the speed and distance limits after using the kit is essential for your safety.
It is especially important to check tire pressure regularly while driving and to visit a service center immediately. The Ford Mustang VI Generation shows how modern technology increases convenience in an emergency while ensuring safety.
This system underlines the aim of the Ford Mustang (VI Gen, 2014–2023) to combine sporty performance with well-designed safety features and to support the driver as well as possible.
Test yourself
A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.