Interior Rear-View Mirror with Compass and Automatic Dimming

Interior Rear-View Mirror with Compass and Automatic Dimming

1 Adjustment button 2 Display The display shows the compass direction in which you are heading.

The compass zone must be set according to your current location. To do this, press and hold the button located on the lower edge of the mirror for 3–4 seconds. The display shows the number of the zone currently set.

To change the zone, press the button until the desired number appears on the display. The zone number can be found on the map shown on the following page.

After 10 seconds the compass is ready for operation again.

For automatic dimming of the mirror, see section "Interior and Exterior Mirrors with Automatic Dimming".