Partition Net

Partition Net

1. Detach the net bag. To do this, unhook the hooks on both sides.

2. Remove the partition net from the bag, unroll it halfway, and attach it on both sides to the safety straps, see arrow.

When unfolding the net for the first time, note how it was stored and secured.

If the vehicle is equipped with a sliding loading floor.

3. Slide back both covers protecting the net mounting points on the ceiling.
4. Insert the bent ends of the rod into the mounts.
5. The covers can be slid forward again, see arrow.

6. Grasping the loops on both sides, see arrow, tension the net and hook its hooks onto the brackets on the seatback.

The illustration does not show the luggage compartment cover retractor. When it is removed, the net hooks are easier to attach to the rear seatback brackets.

7. When the rear seatback is folded down, the net can be removed from the safety straps, fully unrolled and secured by inserting the rod into the front ceiling mounts and hooking the three hooks onto the brackets on the rear seatback.

The illustration shows the right lower mount.