Rear View Mirrors

To ensure adequate rear visibility, keep the interior and exterior rearview mirrors clean and check that they are properly adjusted. Before driving, make sure the rearview mirrors are correctly adjusted.

Interior Rearview Mirror

The interior rearview mirror has two standard positions: one for daytime driving and the other for night driving. In the night position, the reflectivity of the mirror is reduced, which helps reduce the glare of headlights from vehicles behind. To switch the mirror between day and night positions, use the lever located on the underside of the mirror housing. Press the lever forward or backward to select the required position.

Electric Outside Rearview Mirror Adjustment
The outside mirror control panel is located in the driver's door armrest, in front of the power window switches. Adjust the mirrors using the slide switch and the rocker switch on the panel as follows:

a) Turn the ignition switch ON;
b) Move the slide switch to the left (L) or right (R) to select the mirror to be adjusted;
c) Press the upper, lower, left or right side of the rocker switch to adjust the position of the selected mirror;
d) After adjusting both mirrors, move the slide switch to the center position, in which the adjustment switch does not operate. This is necessary to prevent accidental changes to the outside mirror adjustment if the switch is pressed by mistake.