Digital Clock

Models Equipped with Climate Control System
The current time is displayed on the clock display only when the ignition is ON.

To set the time, proceed as follows:

a) Turn the ignition ON. The hour and minute display areas should appear on the display;
b) Press and hold the HOUR button until the first two digits show the correct hour of the current time;
c) Press and hold the MIN button until the last two digits show the correct minute of the current time.

Models Not Equipped with Climate Control System
The digital clock shows the current time only when the ignition is ON.

To set the time, proceed as follows:

a) Turn the ignition ON. The hour and minute display areas should appear on the display;
b) Press and hold the H (Hour) button until the first two digits show the correct hour of the current time;
c) Press and hold the M (Minute) button until the last two digits show the correct minute of the current time.

The R button is used to quickly correct the clock reading using time signals. If 30 minutes or less have passed since the start of the current hour, the clock is set to the start of the previous hour. If more than 30 minutes have passed since the start of the current hour, the clock is set to the start of the next hour. For example:

Initial clock reading

1:06 1:00
1:52 2:00