Daewoo Nexia Quiz
Body

Hood

In this manual: Body
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read

GENERAL INFORMATION

Капот
Hood

1. HOOD.

2. HOOD SUPPORT.

3. SCREW.

4. HOOD HINGE.

5. SEALING STRIP

Remove or disconnect:

PROCEDURE.

1. Raise the hood and install the hood support..

2. Cover the front fenders and windshield with protective covers to

prevent accidental damage to the paint and glass during hood removal and installation..

3. Mark the position of the hinges relative to the hood to simplify later

installation..

4. Remove the two mounting screws from each hood hinge..

5. With the help of a second mechanic, remove the hood from the vehicle..

Installation

PROCEDURE.

1. With the help of a second mechanic, install the hood and adjust its position using the marks made earlier..

2. Install two mounting screws for each hood hinge..

3. Check the hood alignment. Lubricate the hinges and latch

mechanism periodically.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.