Body

Vent Sunroof - Trim

~1min read

Remove or disconnect:

PROCEDURE.

1. Remove the glass panel from the sunroof frame..

2. Remove the two screws and the latch holder from the headliner..

3. Remove the trim from the sunroof opening reinforcement, starting from the middle of the rear of the opening..

Install or connect

Монтаж окантовки проема люка
Sunroof Opening Trim Installation

1. SUNROOF OPENING.

2. TRIM.

3. HEADLINER

PROCEDURE.

1. Press the headliner against the sunroof holder, turn the edge of the headliner panel and insert it into the groove between the holder and the opening reinforcement around the entire perimeter..

2. Install the sunroof opening trim. Starting from the middle of the rear side of the opening, position the trim on the reinforcement and secure it by lightly tapping along the entire perimeter of the opening with a rubber mallet..

3. Install the latch holder on the headliner and tighten 2 screws..

4. Install the glass panel on the sunroof frame.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.