Daewoo Nexia Quiz
Body

Rear Door Lock Cylinder Replacement (hatchback)

In this manual: Body
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read

GENERAL INFORMATION

Цилиндр замка
Lock Cylinder

1. SPRING SEATS

2. FIRST SLOT FOR RETAINING

PLATE (REMAINS EMPTY)

3. LOCKING PLATE

PROCEDURE.

1. Insert the springs, plates and retaining plates into the corresponding holes and slots of the lock cylinder. Use the key code as a reference.

Warning.

Do not install the spring and plate in the first slot of the cylinder. During assembly,

lubricate all springs and plates with a thin layer of multipurpose grease before installing them into the lock cylinder.

.

2. To check the assembly, insert the key into the lock cylinder. If all

plates protrude from the cylinder, the assembly is correct.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.