Daewoo Nexia Quiz
Body

Front Seats - Seat Track Assembly

In this manual: Body
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read
0204060801003526N·mlb·ft
Tightening torque found on this page

Remove or disconnect:

PROCEDURE.

1. Remove the ring cap from the inner seat track.

2. Remove the cover from the outer seat track.

3. Remove 4 bolts and remove the front seat assembly from the vehicle.

4. Remove 4 bolts and disconnect the seat track assembly from the seat cushion.

assembly.

Installation

PROCEDURE.

1. Install the seat track assembly to the seat cushion. Install 4 bolts and tighten.

them to 35 N·m.

2. Install the front seat assembly in the vehicle. Install 4 bolts and tighten them to 35 N·m.

3. Install the cover on the outer seat track.

4. Install the ring cap on the inner seat track.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.