Body

Vent Sunroof - Glass Panel

~1min read
010203040505.54N·mlb·ft
Tightening torque found on this page

Remove or disconnect:

PROCEDURE.

1. Open the sunroof by moving the latch handle forward and up..

2. Press the two buttons at the base of the latch..

3. Remove the latch from the sunroof frame..

4. Remove the glass panel from the sunroof frame by turning the panel upward..

Installation

PROCEDURE.

1. Install the glass panel on the sunroof frame, inserting the hinge brackets into the

corresponding recesses in the frame..

2. Install the latch on the sunroof frame, securing its holder..

3. Loosen the hinge-to-glass mounting screws and adjust the sunroof position. Tighten the screws to 5.5 N·m.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.