Daewoo Nexia Quiz
Body

Roof

In this manual: Body
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read

GENERAL INFORMATION.

The roof panel is stamped from a single steel sheet and joined to the headliner panel, which is also a single piece. On the right and left sides of the

roof there are moldings covering the longitudinal joints where the roof panel joins the

body sides. The roof moldings are serviced and supplied as

separate spare parts.

On sedan and hatchback bodies, similar headliner panels are used,

molded as a single unit. A fabric covering is applied to the base layer of the panel

with a foam backing. The design of the headliner panel requires that it be replaced only as a complete assembly (if necessary). Installation of the headliner panel is completed by fastening the mounting parts along the interior trim moldings and

door weatherstrips.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.