Daewoo Nexia Quiz
Body

Body Interior Panels and Equipment - Center Trim Panel (Sedan)

In this manual: Body
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read

Remove or disconnect:

PROCEDURE.

1. Front and rear door scuff plates.

2. Remove the lower trim panel screw from the B-pillar (with seat belt guide).

3. Disconnect the center trim panel from the plastic clips using a suitable tool.

puller.

Installation

PROCEDURE.

1. Install the center trim panel, inserting the plastic clips into the correct holes.

2. Install the lower trim panel screw to the pillar (with seat belt guide).

3. Front and rear door scuff plates.

4. Secure the front and rear door sill trim plates.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.