Daewoo Nexia Quiz
Body

Door Lock Assembly

In this manual: Body
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read

PROCEDURE.

1. Apply grease to the inner surface of the lock housing bore and insert the cylinder with key into it..

2. Install the return spring on the upper part of the lock housing.

Warning.

Both ends of the spring must be inserted into the central hole of the housing.

lock..

3. Install the bracket on the upper part of the lock housing.

4. Press the ring with the drive lever onto the top of the lock cylinder. The lever

must be positioned between the ends of the return spring.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.