Daewoo Nexia Quiz
Body

Lock Cylinder Assembly

In this manual: Body
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read

PROCEDURE.

1. Starting from the second position, insert the plate springs and locking plates into the cylinder.

corresponding holes and slots of the lock cylinder. When doing so, be guided

follow the key code..

Warning.

Do not install the spring and plate in the first slot of the cylinder..

When installing the springs and locking plates into the lock cylinder, lubricate all

multipurpose grease.

2. To check the assembly, leave the key in the lock cylinder. If all

plates protrude from the cylinder, the assembly is correct.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.