Daewoo Nexia Quiz
Body

Front Bumper Outer Cover

In this manual: Body
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read

Remove or disconnect:

PROCEDURE.

1. Disconnect the negative battery cable.

2. Remove the three front grille mounting screws.

3. Remove one outer cover mounting screw from each wheel housing.

4. Disconnect the plastic clips located on the underside of the cover. Remove the cover from the bumper.

5. Remove the parking lights and turn signal lights from the bumper outer cover.

6. Disconnect the fog light wiring (if equipped).

7. Remove the bumper outer cover from the vehicle.

Installation

PROCEDURE.

1. Connect the fog light wiring (if equipped) and

install the bumper outer cover on the vehicle.

2. Install the parking lights and turn signal lights on the bumper outer cover.

Install the cover on the front bumper and secure the cover with the plastic clips.

3. Install one outer cover mounting screw in each wheel housing.

4. Install the three front grille mounting screws.

5. Negative battery cable.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.