Rear Seat - Seat Trim Panel and Upholstery

Seat Cushion.

Remove or disconnect:

PROCEDURE.

1. Rear seat cushion..

2. Trim attachment wire and retainer plate..

3. Cut off the bent washers with cutters (4 on each half of the cushion)..

4. Clips (4 on each half of the cushion)..

5. Reinforcing plate and seat cushion cover..

Installation

PROCEDURE.

1. Seat cushion cover, secure it with the reinforcing plate..

2. Clips and bent washers using pliers..

3. Trim attachment wire..

4. Trim attachment plate..

5. Seat cushion into the vehicle.

Seatback.

Remove or disconnect:

PROCEDURE.

1. Rear seat cushion..

2. Trim attachment wire and retainer plate..

3. Cut off the bent washers with cutters..

4. Reinforcing plate..

5. Clip and seatback cover..

Installation

PROCEDURE.

1. Seatback cover, secure it with the clip..

2. Reinforcing plate..

3. Bent washers using pliers..

4. Seatback attachment plate and wire..

5. Seat cushion.