Daewoo Nexia Quiz
Body

Front Seats

In this manual: Body
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read
0204060801003526N·mlb·ft
Tightening torque found on this page

GENERAL INFORMATION

Переднее сиденье
Front Seat

1. HEADREST ASSEMBLY.

2. GUIDE BUSHING.

3. INNER COVER.

4. SEAT BACK RECLINING MECHANISM.

5. SEAT BACK RECLINING MECHANISM COVER.

6. LEVER BUTTON.

7. BOLT.

8. TAPER PIN.

9. SEAT CUSHION HINGE COVER.

10. SEAT BACK HINGE COVER.

11. BUSHING.

12. ADJUSTING BOLT.

13. LONGITUDINAL ADJUSTMENT MECHANISM.

ADJUSTMENT.

14. BUSHING.

15. PIN.

16. SEAT RUNNER COVER.

17. SEAT BELT BUCKLE.

18. BOLT

Крепление переднего сиденья к полу
Front Seat Mounting to Floor

Remove or disconnect:

PROCEDURE.

1. Raise the rear adjusting lever and slide the seat to the rearmost position.

2. Remove the outer seat runner cover 16..

3. Remove the 2 seat mounting bolts (M 10 x 1.25)..

4. Raise the front and rear adjusting levers and slide the seat to the front position..

5. Remove the inner and outer seat runner covers and the longitudinal seat adjustment mechanisms..

6. Remove the 2 seat mounting bolts (M 10 x 1.25)..

Installation

Installation is performed in the reverse order of removal. Tighten the bolts

of the front seat mounting to a torque of 35 N·m.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.