Daewoo Nexia Quiz
Body

Rear View Mirror Adjustment

In this manual: Body
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read

GENERAL INFORMATION.

The rear view mirror has a two-hinge mounting. The bracket is attached by a simple hinge to a base glued to the windshield. This hinge allows

the longitudinal position of the mirror to be adjusted and is secured by a screw. The mirror itself

is connected to the bracket by a ball joint. To adjust

the longitudinal position of the mirror, first loosen the screw,

located on the right side of the bracket, which secures the hinge. To do this,

use a 3 mm wrench. Adjust the position of the mirror and

tighten the hinge locking screw.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.