Rear Door - Center High-Mount Stop Lamp

GENERAL INFORMATION

Center High-Mount Stop Lamp

1. NUTS (2 PCS.)

2. SCREWS (2 PCS.)

3. BRACKET.

4. LENS.

5. STOP LAMP HOUSING

Remove or disconnect:

PROCEDURE.

1. Disconnect the negative battery cable.

2. Remove the plastic clips and the rear door trim panel.

3. Remove the 2 nuts and the stop lamp mounting bracket.

4. Remove the stop lamp assembly from the socket by disconnecting the electrical connector.

5. Remove the 2 screws and the lens.

6. Remove the bulb from the socket.

Installation

PROCEDURE.

1. Install the bulb into the socket.

2. Install the lens, securing it with two screws.

4. Carefully unscrew the ECT sensor..

4. Install the stop lamp into the rear door socket.

5. Install the stop lamp mounting bracket, securing it with two nuts.

6. Install the rear door trim panel, securing it with plastic clips.

7. Connect the negative battery cable.