Ambient Light
Components
COMPONENTS
ILLUSTRATION
*1 |
FRONT CONSOLE UPPER PANEL GARNISH |
*2 |
INSTRUMENT PANEL CUP HOLDER ASSEMBLY |
*3 |
LOWER INSTRUMENT PANEL FINISH PANEL LH |
*4 |
LOWER INSTRUMENT PANEL FINISH PANEL RH |
*5 |
NO. 2 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY |
*6 |
NO. 3 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY |
*7 |
NO. 4 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY |
- |
- |
Inspection
INSPECTION
PROCEDURE
1. INSPECT NO. 2 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(a) Apply auxiliary battery voltage to the No. 2 interior illumination light sub-assembly and check that the light illuminates. OK:
If the result is not as specified, replace the No. 2 interior illumination light sub-assembly. |
|
2. INSPECT NO. 3 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(a) Apply auxiliary battery voltage to the No. 3 interior illumination light sub-assembly and check that the light illuminates. OK:
If the result is not as specified, replace the No. 3 interior illumination light sub-assembly. |
|
3. INSPECT NO. 4 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(a) Apply auxiliary battery voltage to the No. 4 interior illumination light sub-assembly and check that the light illuminates. OK:
If the result is not as specified, replace the No. 4 interior illumination light sub-assembly. |
|
Installation
INSTALLATION
PROCEDURE
1. INSTALL NO. 3 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(a) Engage the 2 guides to install the No. 3 interior illumination light sub-assembly.
2. INSTALL NO. 2 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(a) Engage the 2 guides to install the No. 2 interior illumination light sub-assembly.
3. INSTALL NO. 4 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(a) for Front Side:
(1) Engage the guide as shown in the illustration to install the No. 4 interior illumination light sub-assembly.
![]() |
Install in this Direction |
(b) for Rear Side:
(1) Engage the guide as shown in the illustration to install the No. 4 interior illumination light sub-assembly.
![]() |
Install in this Direction |
4. INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY
(a) Install the instrument panel cup holder assembly with the 7 screws.
5. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
Click here ![]()
6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH
Click here ![]()
7. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH
Click here ![]()
Removal
REMOVAL
PROCEDURE
1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH
Click here ![]()
2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH
Click here ![]()
3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
Click here ![]()
4. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY
(a) Remove the 7 screws and instrument panel cup holder assembly. |
![]() |
5. REMOVE NO. 4 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(a) for Rear Side:
(1) Disengage the guide as shown in the illustration to remove the No. 4 interior illumination light sub-assembly.
![]() |
Remove in this Direction |
(b) for Front Side:
(1) Disengage the guide as shown in the illustration to remove the No. 4 interior illumination light sub-assembly.
![]() |
Remove in this Direction |
6. REMOVE NO. 2 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(a) Disengage the 2 guides to remove the No. 2 interior illumination light sub-assembly. |
![]() |
7. REMOVE NO. 3 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(a) Disengage the 2 guides to remove the No. 3 interior illumination light sub-assembly. |
![]() |





