Vehicle Interior
Vanity Light Bulb
In this manual: Vehicle Interior
~1min read
Replacement
REPLACEMENT
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. REMOVE FRONT LENS HOLDER LH
(a) Using a screwdriver with its tip wrapped with protective tape, disengage the claw and guide to remove the front lens holder LH. |
|
2. REMOVE FRONT LENS HOLDER RH
HINT:
Use the same procedure as for the front lens holder LH.
3. REMOVE VANITY LIGHT BULB
(a) Remove the 2 vanity light bulbs from the visor assembly.
4. INSTALL VANITY LIGHT BULB
(a) Install the 2 vanity light bulbs to the visor assembly.
5. INSTALL FRONT LENS HOLDER LH
(a) Engage the guide and claw to install the front lens holder LH. |
![]() |
6. INSTALL FRONT LENS HOLDER RH
HINT:
Use the same procedure as for the front lens holder LH.
Was this page helpful?

