Console Box Light
Components
COMPONENTS
ILLUSTRATION
*1 |
CONSOLE REAR END PANEL SUB-ASSEMBLY |
*2 |
NO. 2 BOX SIDE PANEL |
*3 |
NO. 3 CONSOLE BOX DUCT |
*4 |
NO. 5 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY |
Inspection
INSPECTION
PROCEDURE
1. INSPECT NO. 5 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
*a |
Component without harness connected (No. 5 Interior Illumination Light Sub-assembly) |
(a) Apply auxiliary battery voltage to the No. 5 interior illumination light sub-assembly and check that the light illuminates.
OK:
Measurement Condition | Specified Condition |
|---|---|
Auxiliary battery positive (+) → 1 (ILL+) Auxiliary battery negative (-) → 2 (ILL-) |
Console box light illuminates |
If the result is not as specified, replace the No. 5 interior illumination light sub-assembly.
Installation
INSTALLATION
PROCEDURE
1. INSTALL NO. 5 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(a) Turn the No. 5 interior illumination light sub-assembly as shown in the illustration to install it.
![]() |
Install in this Direction |
(b) Connect the connector.
2. INSTALL NO. 3 CONSOLE BOX DUCT
Click here ![]()
3. INSTALL NO. 2 BOX SIDE PANEL
Click here ![]()
4. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
Click here ![]()
5. INSTALL CONSOLE ASSEMBLY
Click here ![]()
Removal
REMOVAL
PROCEDURE
1. REMOVE CONSOLE ASSEMBLY
Click here ![]()
2. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY
Click here ![]()
3. REMOVE NO. 2 BOX SIDE PANEL
Click here ![]()
4. REMOVE NO. 3 CONSOLE BOX DUCT
Click here ![]()
5. REMOVE NO. 5 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(a) Disconnect the connector. |
![]() |
(b) Turn the No. 5 interior illumination light sub-assembly as shown in the illustration to remove it.
![]() |
Remove in this Direction |


