Electrical Key Oscillator(for Front Floor)
Components
COMPONENTS
ILLUSTRATION
*1 |
CONSOLE ASSEMBLY |
*2 |
NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY |
Installation
INSTALLATION
PROCEDURE
1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY
(a) Engage the clamp to install the No. 1 indoor electrical key antenna assembly.
NOTICE:
Be careful when installing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.
(b) Connect the connector.
(c) Connect the front floor carpet assembly.
2. INSTALL CONSOLE ASSEMBLY
Click here ![]()
Removal
REMOVAL
PROCEDURE
1. REMOVE CONSOLE ASSEMBLY
Click here ![]()
2. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY
(a) Disconnect the front floor carpet assembly.
(b) Disconnect the connector. |
![]() |
(c) Disengage the clamp to remove the No. 1 indoor electrical key antenna assembly.
NOTICE:
Be careful when removing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.
