Footwell Light(for Front Side)
Components
COMPONENTS
ILLUSTRATION
*A |
for Driver Side |
*B |
for Front Passenger Side |
*1 |
NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
*2 |
NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY |
*3 |
NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
- |
- |
Inspection
INSPECTION
PROCEDURE
1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
*a |
Component without harness connected (No. 1 Interior Illumination Light Assembly) |
(a) Apply auxiliary battery voltage to the No. 1 interior illumination light assembly and check that the light illuminates.
OK:
Measurement Condition | Specified Condition |
|---|---|
Auxiliary battery positive (+) → 1 (B) Auxiliary battery negative (-) → 2 (E) |
Front footwell light illuminates |
If the result is not as specified, replace the No. 1 interior illumination light assembly.
Installation
INSTALLATION
PROCEDURE
1. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
(a) Engage the 2 claws to install the No. 1 interior illumination light assembly.
2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Driver Side)
Click here ![]()
3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Front Passenger Side)
Click here ![]()
Removal
REMOVAL
PROCEDURE
1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Driver Side)
Click here ![]()
2. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Front Passenger Side)
Click here ![]()
3. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
(a) for Driver Side:
(1) Disengage the 2 claws to remove the No. 1 interior illumination light assembly. |
![]() |
(b) for Front Passenger Side:
(1) Disengage the 2 claws to remove the No. 1 interior illumination light assembly. |
![]() |

