Seat Memory Switch
Components
COMPONENTS
ILLUSTRATION
*1 |
FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH |
*2 |
SEAT MEMORY SWITCH |
Inspection
INSPECTION
PROCEDURE
1. INSPECT SEAT MEMORY SWITCH (DRIVER DOOR)
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
|
|
|||||||||||||||||||||||||||||||
Installation
INSTALLATION
PROCEDURE
1. INSTALL SEAT MEMORY SWITCH
(a) Engage the 4 claws to install the seat memory switch to the front door trim board sub-assembly LH.
2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
Click here ![]()
Removal
REMOVAL
PROCEDURE
1. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
Click here ![]()
2. REMOVE SEAT MEMORY SWITCH
(a) Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the seat memory switch from the front door trim board sub-assembly LH. |
|

