Lost Communication With ECM/PCM "A" Missing Message (U010087,...,U113387). Vehicle Proximity Notification System Warning Message Display Malfunction
Lost Communication With ECM/PCM "A" Missing Message (U010087,...,U113387)
DESCRIPTION
The combination meter assembly communicates with each ECU via CAN communication.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | Note |
|---|---|---|---|---|---|
U010087 |
Lost Communication With ECM/PCM "A" Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
- |
U012987 |
Lost Communication with Brake System Control Module Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
- |
U013187 |
Lost Communication with Power Steering Control Module Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
- |
U014287 |
Lost Communication with Body Control Module "B" Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
- |
U015187 |
Lost Communication with Restraints Control Module Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
- |
U016387 |
Lost Communication with Navigation Control Module Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
- |
U016487 |
Lost Communication with HVAC Control Module Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
- |
U018287 |
Lost Communication with Lighting Control Module Front Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
w/ Cornering Light |
U023387 |
Lost Communication with Side Obstacle Detection Control Module Right Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
- |
U023A87 |
Lost Communication with Image Processing Module "A" Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
- |
U029387 |
Lost Communication With Hybrid Powertrain Control Module Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
- |
U032787 |
Software Incompatibility with Vehicle Security Control Module Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
- |
U110487 |
Lost Communication with Driving Support ECU Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
- |
U110687 |
Lost Communication with Electric Parking Brake Module Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
- |
U111087 |
Lost Communication with Intuitive Parking Assist Module Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
w/ Intelligent Clearance Sonar System |
U111287 |
Lost Communication with Combination Switch Module Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
- |
U111787 |
Lost Communication with Accessory Gateway Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
- |
U113387 |
Lost Communication with PMN Module Missing Message |
Diagnosis Condition:
Malfunction Status:
Malfunction Time:
|
|
DTC stored |
- |
PROCEDURE
CHECK FOR DTC (METER / GAUGE SYSTEM)
(a) Check for DTCs.
Body Electrical > Combination Meter > Trouble Codes| NEXT | GO TO CAN COMMUNICATION SYSTEM |
Vehicle Proximity Notification System Warning Message Display Malfunction
DESCRIPTION
The combination meter assembly and vehicle approaching speaker controller are connected via direct line. If a malfunction occurs in the vehicle proximity notification system, the combination meter assembly receives a malfunction signal from the vehicle approaching speaker controller and outputs a warning.
WIRING DIAGRAM
NOTICE:
- When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
- The following troubleshooting procedure is based on the assumption that the vehicle proximity notification system is normal. Confirm that the vehicle proximity notification system is not malfunctioning before performing the following procedure.
Click here

PROCEDURE
INSPECT COMBINATION METER ASSEMBLY (OUTPUT VOLTAGE)
*a |
Front view of wire harness connector (to Vehicle Approaching Speaker Controller) |
(a) Disconnect the G38 vehicle approaching speaker controller connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Tester Connection | Condition | Specified Condition |
|---|---|---|
G38-10 (IND) - Body ground |
Power switch on (IG) |
11 to 14 V |
| NG | GO TO STEP 3 |
|
INSPECT COMBINATION METER ASSEMBLY (WARNING MESSAGE)
*a |
Front view of wire harness connector (to Vehicle Approaching Speaker Controller) |
(a) Turn the power switch off.
(b) Connect SST to terminal G38-10 (IND) and body ground.
SST: 09843-18040
(c) Turn the power switch on (IG).
(d) Check the combination meter assembly display.
Result | Proceed to |
|---|---|
"Proximity Notification System Malfunction Visit Your Dealer" displayed on multi-information display |
A |
"Proximity Notification System Malfunction Visit Your Dealer" not displayed on multi-information display |
B |
| A | REPLACE VEHICLE APPROACHING SPEAKER CONTROLLER |
| B | REPLACE COMBINATION METER ASSEMBLY |
CHECK HARNESS AND CONNECTOR (VEHICLE APPROACHING SPEAKER CONTROLLER - COMBINATION METER ASSEMBLY)
(a) Disconnect the G16 combination meter assembly connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
|---|---|---|
G38-10 (IND) - G16-8 (IND) |
Always |
Below 1 Ω |
G38-10 (IND) or G16-8 (IND) - Body ground |
Always |
10 kΩ or higher |
| OK | REPLACE COMBINATION METER ASSEMBLY |
| NG | REPAIR OR REPLACE HARNESS OR CONNECTOR |