Luggage Compartment Room Light
Components
COMPONENTS
ILLUSTRATION
*1 |
LUGGAGE COMPARTMENT LIGHT BULB |
*2 |
NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY |
*3 |
SHADE |
*4 |
NO. 1 LUGGAGE COMPARTMENT LIGHT LENS |
Inspection
INSPECTION
PROCEDURE
1. INSPECT NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
*a |
Component without harness connected (No. 1 Luggage Compartment Light Assembly) |
(a) Apply auxiliary battery voltage to the No. 1 luggage compartment light assembly and check that the light illuminates.
OK:
Measurement Condition | Specified Condition |
|---|---|
Auxiliary battery positive (+) → 1 (DB) Auxiliary battery negative (-) → 2 (DL) |
Luggage compartment light illuminates |
If the result is not as specified, replace the bulb or No. 1 luggage compartment light assembly.
Installation
INSTALLATION
PROCEDURE
1. INSTALL LUGGAGE COMPARTMENT LIGHT BULB
(a) Install the luggage compartment light bulb to the No. 1 luggage compartment light lens as shown in the illustration.
![]() |
Install in this Direction |
(b) Engage the 4 claws to install the shade to the No. 1 luggage compartment light lens. |
![]() |
2. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
(a) Connect the connector.
(b) Engage the claw to install the No. 1 luggage compartment light assembly. |
![]() |
Removal
REMOVAL
PROCEDURE
1. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
(a) Using a screwdriver with its tip wrapped with protective tape, disengage the claw. |
|
(b) Disconnect the connector to remove the No. 1 luggage compartment light assembly.
2. REMOVE LUGGAGE COMPARTMENT LIGHT BULB
(a) Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the shade from the No. 1 luggage compartment light lens. |
|
(b) Remove the luggage compartment light bulb from the No. 1 luggage compartment light lens as shown in the illustration.
![]() |
Remove in this Direction |





