Power Outlet Socket(for Instrument Panel)
Components
COMPONENTS
ILLUSTRATION
*1 |
CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
*2 |
CONSOLE BOX BEZEL |
*3 |
CONSOLE BOX POCKET SUB-ASSEMBLY |
*4 |
FRONT CONSOLE UPPER PANEL GARNISH |
*5 |
LOWER INSTRUMENT PANEL FINISH PANEL LH |
*6 |
LOWER INSTRUMENT PANEL FINISH PANEL RH |
*7 |
NO. 1 POWER OUTLET SOCKET ASSEMBLY |
*8 |
NO. 1 POWER OUTLET SOCKET COVER |
*9 |
REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
*10 |
SHIFT LEVER KNOB SUB-ASSEMBLY |
Installation
INSTALLATION
PROCEDURE
1. INSTALL NO. 1 POWER OUTLET SOCKET COVER
(a) Engage the 2 claws to install the No. 1 power outlet socket cover as shown in the illustration.
![]() |
Install in this Direction |
2. INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY
(a) Engage the claw to install the No. 1 power outlet socket assembly as shown in the illustration.
![]() |
Install in this Direction |
3. INSTALL CONSOLE BOX BEZEL
Click here ![]()
4. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
Click here ![]()
5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Click here ![]()
6. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Click here ![]()
7. INSTALL CONSOLE BOX POCKET SUB-ASSEMBLY
Click here ![]()
8. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
Click here ![]()
9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH
Click here ![]()
10. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH
Click here ![]()
Removal
REMOVAL
PROCEDURE
1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH
Click here ![]()
2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH
Click here ![]()
3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
Click here ![]()
4. REMOVE CONSOLE BOX POCKET SUB-ASSEMBLY
Click here ![]()
5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Click here ![]()
6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
Click here ![]()
7. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
Click here ![]()
8. REMOVE CONSOLE BOX BEZEL
Click here ![]()
9. REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
(a) Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the No. 1 power outlet socket assembly as shown in the illustration.
*a |
Protective Tape |
![]() |
Remove in this Direction |
10. REMOVE NO. 1 POWER OUTLET SOCKET COVER
(a) Disengage the 2 claws and remove the No. 1 power outlet socket cover as shown in the illustration.
![]() |
Remove in this Direction |

