Door Courtesy Light
Components
COMPONENTS
ILLUSTRATION
*1 |
COURTESY LIGHT ASSEMBLY |
*2 |
COURTESY LIGHT BULB |
*3 |
COURTESY LIGHT LENS |
*4 |
COURTESY LIGHT COVER |
*5 |
COURTESY LIGHT HOUSING |
- |
- |
Inspection
INSPECTION
PROCEDURE
1. INSPECT COURTESY LIGHT ASSEMBLY
*a |
Component without harness connected (Courtesy Light Assembly) |
(a) Apply auxiliary battery voltage to the courtesy light assembly and check that the light illuminates.
OK:
Measurement Condition | Specified Condition |
|---|---|
Auxiliary battery positive (+) → 1 (B) Auxiliary battery negative (-) → 2 (SW) |
Door Courtesy light illuminates |
If the result is not as specified, replace the bulb or courtesy light assembly.
Installation
INSTALLATION
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. INSTALL COURTESY LIGHT BULB
(a) Install the courtesy light bulb to the courtesy light housing as shown in the illustration.
![]() |
Install in this Direction |
(b) Install the courtesy light cover to the courtesy light housing as shown in the illustration.
![]() |
Install in this Direction |
(c) Engage the claw to install the courtesy light housing with the courtesy light cover as shown in the illustration.
![]() |
Install in this Direction |
2. INSTALL COURTESY LIGHT ASSEMBLY
(a) Connect the connector.
(b) Engage the claw to install the courtesy light assembly. |
|
Removal
REMOVAL
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. REMOVE COURTESY LIGHT ASSEMBLY
(a) Using a screwdriver with its tip wrapped with protective tape, disengage the claw. |
|
(b) Disconnect the connector to remove the courtesy light assembly.
2. REMOVE COURTESY LIGHT BULB
(a) Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the courtesy light housing with the courtesy light cover as shown in the illustration.
*a |
Protective Tape |
![]() |
Remove in this Direction |
(b) Remove the courtesy light cover from the courtesy light housing as shown in the illustration.
![]() |
Remove in this Direction |
(c) Remove the courtesy light bulb from the courtesy light housing as shown in the illustration.
![]() |
Remove in this Direction |



