Footwell Light(for Rear Side)
Components
COMPONENTS
ILLUSTRATION
*1 |
CONSOLE REAR END PANEL SUB-ASSEMBLY |
*2 |
NO. 6 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY |
Inspection
INSPECTION
PROCEDURE
1. INSPECT NO. 6 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
*a |
Component without harness connected (No. 6 Interior Illumination Light Sub-assembly) |
(a) Apply auxiliary battery voltage to the No. 6 interior illumination light sub-assembly and check that the light illuminates.
OK:
Measurement Condition | Specified Condition |
|---|---|
Auxiliary battery positive (+) → 1 (B) Auxiliary battery negative (-) → 2 (E) |
Footwell light illuminates |
If the result is not as specified, replace the No. 6 interior illumination light sub-assembly.
Installation
INSTALLATION
PROCEDURE
1. INSTALL NO. 6 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(a) for RH Side:
(1) Turn the No. 6 interior illumination light sub-assembly as shown in the illustration to install it.
![]() |
Install in this Direction |
(b) for LH Side:
(1) Turn the No. 6 interior illumination light sub-assembly as shown in the illustration to install it.
![]() |
Install in this Direction |
2. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
Click here ![]()
Removal
REMOVAL
PROCEDURE
1. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY
Click here ![]()
2. REMOVE NO. 6 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
(a) for LH Side:
(1) Turn the No. 6 interior illumination light sub-assembly as shown in the illustration to remove it.
![]() |
Remove in this Direction |
(b) for RH Side:
(1) Turn the No. 6 interior illumination light sub-assembly as shown in the illustration to remove it.
![]() |
Remove in this Direction |

