Camera Heater
Components
COMPONENTS
ILLUSTRATION
*1 |
FORWARD RECOGNITION CAMERA |
*2 |
FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY |
Installation
INSTALLATION
PROCEDURE
1. INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY
NOTICE:
- Do not apply force to the heater area as the heater may become damaged.
- Do not forcibly pull the wire harness as it may become damaged.
(a) Engage the 2 guides and 2 claws as indicated by the arrows, in the order shown in the illustration.
![]() |
Heater Area |
![]() |
Install in this Direction (1) |
![]() |
Install in this Direction (2) |
NOTICE:
Make sure that the 2 claws are engaged as shown in the illustration. Failure to do so may result in the malfunction of systems that use the forward recognition camera.
(b) Engage the clamp and 7 ribs to install the forward recognition with heater hood sub-assembly. NOTICE: As the No. 1 forward recognition cover cannot be installed correctly if the clamp and ribs are not engaged securely, make sure to engage each clamp and rib securely. HINT: Engage the clamp and ribs in the order shown in the illustration. |
|
(c) Connect the connector.
2. INSTALL FORWARD RECOGNITION CAMERA
Click here ![]()
Removal
REMOVAL
PROCEDURE
1. REMOVE FORWARD RECOGNITION CAMERA
Click here ![]()
2. REMOVE FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY
(a) Disconnect the connector. |
![]() |
(b) Disengage the clamp and 7 ribs. HINT: Disengage the clamp and ribs in the order shown in the illustration. |
|
(c) Pull the forward recognition hood in the direction indicated by the arrow (1) shown in the illustration to disengage the 2 claws.
![]() |
Remove in this Direction (1) |
![]() |
Remove in this Direction (2) |
(d) Pull the forward recognition hood in the direction indicated by the arrow (2) shown in the illustration to disengage the 2 guides and remove the forward recognition with heater hood sub-assembly.







