Fuel and Exhaust System
Mass Air Flow Sensor
In this manual: Fuel and Exhaust System
~1min read
GENERAL INFORMATION
The air flow sensor is installed on the right side of the throttle body.Before removing it, disconnect the negative battery cable.
Removal and installation
PROCEDURE

1. Disconnect the connector from the air flow sensor.

2. Remove the mounting screws (indicated by the arrows) and remove the sensor from the throttle body, then remove its O-ring (if equipped).
3. Installation is performed in the reverse order of removal. Use a new O-ring (if equipped) during installation and securely tighten the mounting screws.
Test yourself
A quick Nissan Sunny quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?