Fuel and Exhaust System
Throttle Pedal
In this manual: Fuel and Exhaust System
~1min read
Removal
PROCEDURE
1. Remove the lower trim panel in the driver's footwell.
2. Disconnect the throttle cable from the pedal.
3. Unscrew the bracket mounting bolts and remove the pedal from the bulkhead together with the bracket.
4. If necessary, disassemble the pedal by removing the cotter pin, shaft and spring.
5. Inspect the condition of the parts. Replace worn parts.
Installation
PROCEDURE
Install in the reverse order. Lubricate the pedal shaft with multipurpose grease. When finished, check the cable adjustment.Test yourself
A quick Nissan Sunny quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?