Fuel and Exhaust System

Power Steering Pressure Switch

~1min read

GENERAL INFORMATION

The switch is installed in the high-pressure line of the power steering system at the rear right corner of the engine compartment. Removal and Installation

PROCEDURE

1. Before removing the switch, set the front wheels straight and disconnect the negative battery cable.

2. Locate the switch and disconnect the connector.

3. Unscrew the switch, remove the switch O-ring and quickly plug the opening in the line to prevent fluid leakage and contamination of the hydraulic system.

4. Install in the reverse order of removal using a new O-ring.

Test yourself

A quick Nissan Sunny quiz: every answer comes with an explanation and a link to the manual page.