Fuel and Exhaust System
Idle Compensation Switch for Power Steering Operation
In this manual: Fuel and Exhaust System
~1min read
GENERAL INFORMATION
The switch is screwed into the power steering circuit at the rear right of the engine compartment.Removal and installation
PROCEDURE
1. Set the wheels in the straight-ahead position and disconnect the battery ground cable.
2. Disconnect the connector from the switch.
3. Unscrew the switch, plug the opening in the pipe and remove the seal.
4. When installing, replace the seal.
Test yourself
A quick Nissan Sunny quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?