Fuel and Exhaust System

Bypass Air Valve

~1min read

GENERAL INFORMATION

The valve is mounted on the front of the throttle body. Removal and Installation

PROCEDURE

1. Disconnect the battery ground cable.

2. Отсоедините от клапана разъем (1 – разъем, 2 – винты крепления).

2. Disconnect the connector from the valve (1 – connector, 2 – mounting screws).

3. Remove the screws and remove the valve with the gasket.

4. Disassemble the valve and check that the piston moves freely.

5. If the piston sticks, replace the valve.

6. Installation is the reverse of removal.

Test yourself

A quick Nissan Sunny quiz: every answer comes with an explanation and a link to the manual page.