Fuel and Exhaust System

Engine Control Unit

~1min read

GENERAL INFORMATION

The engine control unit is located in front of the center console, on the driveshaft tunnel projection.

Removal and installation

PROCEDURE

1. Before removing the engine control unit, disconnect the negative battery cable.

2. To access the electronic control unit, remove the mounting screws and release the retaining clips, then remove the small trim panels from both sides of the propeller shaft tunnel at the front of the center console.

3. Remove the mounting screws and remove the control unit from the mounting bracket.

4. Disconnect the connectors and remove the electronic control unit from the vehicle.

5. Installation is the reverse of removal.

6. When installing, check that the connector is securely connected.

Test yourself

A quick Nissan Sunny quiz: every answer comes with an explanation and a link to the manual page.