Nissan Sunny Quiz
Fuel and Exhaust System

Fuel level sender

In this manual: Fuel and Exhaust System
Owner's Manual — 35Maintenance — 752.0 Liter Gasoline Engine — 36Diesel Engine — 32Cooling System — 11Heating and Ventilation System — 10Fuel and Exhaust System — 154Engine Starting System — 16Clutch — 7Manual transmission — 7Automatic transmission — 9Axle Shafts — 7Brakes — 22Suspension and Steering — 52Electrical System — 30
~1min read

Removal

PROCEDURE

1. Disconnect the battery ground cable.

2. Remove the rear seat cushion (see subsection 13.23).

3. Remove the two bolts and the inspection cover.

4. Disconnect the wiring harness connector from the sensor and secure it to the body with adhesive tape.

5. Relieve the fuel system pressure. Mark, disconnect, and plug the fuel hoses at the top of the sensor.

6. Mark the position of the sensor. If there is an arrow, it must point toward the front of the vehicle.

7. Loosen the union nut by lightly tapping a screwdriver placed in the slots of the nut.

8. On some vehicles, the bolts must be removed to remove the sensor.

9. Carefully lift the sensor. Disconnect the pump from the bracket inside the tank by pressing on the bracket, and remove the sensor together with the pump.

10. Remove the gasket.

11. Disconnect the hose at the bottom and separate the pump from the sensor.

12. Clean the filter and inspect it carefully. If it is clogged or damaged, replace it.

Installation

PROCEDURE

1. Install in the reverse order.

2. Replace the O-ring, securely secure the pump. Before assembly, align the marks on the sensor and the tank.

3. Make sure all hoses are securely and correctly connected.

Test yourself

A quick Nissan Sunny quiz: every answer comes with an explanation and a link to the manual page.